You are here: Home Popular Products automatic sliding gate Automatic Factory Gate Opener

Automatic Factory Gate Opener

Factory can be a very busy place because it is the place where products are being manufactured and produced. People working in a factory usually carry heavy carts full of products and other things that they need inside the factory. Sometimes they even use a machine and other equipments just to hold and carry many things inside and out the factory. To open and close the gate of a factory can bring hassle and may consume too much time and effort of the busy people working in the place. In a fast phase environment like in factory an automatic system can be a very useful for all the workers of the factory. Automatic factory gate opener can really help workers to save time and effort in opening and closing the gate of the factory.

Automatic Factory Gate Opener

 Automatic Factory Gate Opener whole set


One set Automatic Factory Gate Opener including: Gate motor, Control board, Base, 2 remote controls, Release key, Mounting accessory.

 FEATURE AND ADVENTAGE of Automatic Factory Gate Opener

1 High sensitivity obstruction detection with automatic reverse. And the reverse force is adjustable.
2. With built-in thermal protector, for protection when the motor heat up to rated temperature
3. Keypad / single button interface
4. Photo beam safety beam interface
5. Auto-close function is adjustable, and the time delay closed is adjustable
6. Electronic Soft Start & Stop 

Automatic Factory Gate Opener 1

 High quality Cast aluminum alloy base
 and Casing Stylish, Compact Design   

Powerful, reliable, smooth operation with 
big torque and low noise
    



Automatic Factory Gate Opener 2

Manual key release design for
emergency purposes

MCU is supplied to control the gate operator

 UNIQUE FUNCTION DIFFERENT FROM OTHER SUPPLIERS

 double side board of Automatic Factory Gate Opener

Double-sides welding spot on the control board, which makes it more durable in case on side welding spot break down.

 TECHNICAL SPECIFICATION of Automatic Factory Gate Opener

 

Model SD370  SD550  SD750  SD950 SD1200 
Power supply  110V/220~230V AC    
Rated power  370W  550W  750W 950W  1200W 
Torque  18N.M 28N.M   38N.M    
Max. Gate weight  600-800kg  1200kg  1600kg 1800kg   2000kg
Travel speed  14m/min  12m/min  10m/min    
Operating ambient Temp.  -20°~+55°    
Weather-resistance Rate  IP44    

 

 INSTALLATION of Automatic Factory Gate Opener

  Automatic Factory Gate Opener instllation

 

 Automatic Factory Gate Opener OPTIONAL ACCESSORIES

  Automatic Factory Gate Opener accessories

1. Photo cell It can detect the tiny obstruction during gate closing or opening and make the gate open automatically. Avoiding people and gate opener from hurting. The valid detecting range of the photo cell is 10 meters.

2. Alarm lamp When the person force entering the house, the alarm lamp will light and sound.

3. Steel rack and nylon rack

Automatic Factory Gate Opener gear rack

4. Access keypad Connecting with access keypad, you can set the code or using the card to control the gate access.

 

Automatic Factory Gate Opener PACKAGING DETAILS

sliding gate opener package


Through modernization also brought innovation and improvement in the equipment and system of the factory. It is good to apply some innovations in the system of the factory because it may lead to the improvement in the quality of work of the factory workers and to the products of the factory as well. Automatic factory gate opener is a manifestation that the factory is improving that is why the management of the factory is applying innovations that can help workers to feel comfortable and work efficiently. Automatic factory gate openers are usually battery and electronic operated. It also use low voltage systems which are affordable and safe. Some automatic factory gate opener can be installed by two or more people but you can also ask assistance from the staff of your automatic gate opener provider.

To have an automatic factory gate opener, you must prepare the gate for installation. To be able to ensure good opening and closing the gate need to move all the way through the arc without touching the ground. Wheels must be attached to the gate. Factory gates with more than 250lbs must have ball bearing and grease fittings. The power source of the automatic factory gate openers are powered by 12 volt DC power which can be very suitable because you can also use a 12 volt battery to your unit. The manufacturer of your automatic gate opener will supply the battery maintainer. You must make sure that you use maintainer and not a charger. There are also several options on how automatic factory gate openers will be controlled. You can choose if you will use a simple remote control to open and close the gate and you can also use some options on how you will operate the controllers of your automatic factory gate openers.

 ORDERS FROM CUSTOMERS

       Gate opener packaging and shipping    


Through modernization also brought innovation and improvement in the equipment and system of the factory. It is good to apply some innovations in the system of the factory because it may lead to the improvement in the quality of work of the factory workers and to the products of the factory as well. Automatic factory gate opener is a manifestation that the factory is improving that is why the management of the factory is applying innovations that can help workers to feel comfortable and work efficiently. Automatic factory gate openers are usually battery and electronic operated. It also use low voltage systems which are affordable and safe. Some automatic factory gate opener can be installed by two or more people but you can also ask assistance from the staff of your automatic gate opener provider.

To have an automatic factory gate opener, you must prepare the gate for installation. To be able to ensure good opening and closing the gate need to move all the way through the arc without touching the ground. Wheels must be attached to the gate. Factory gates with more than 250lbs must have ball bearing and grease fittings. The power source of the automatic factory gate openers are powered by 12 volt DC power which can be very suitable because you can also use a 12 volt battery to your unit. The manufacturer of your automatic gate opener will supply the battery maintainer. You must make sure that you use maintainer and not a charger. There are also several options on how automatic factory gate openers will be controlled. You can choose if you will use a simple remote control to open and close the gate and you can also use some options on how you will operate the controllers of your automatic factory gate openers.

 

   WHY CHOOSE US?

   why choose us 1 

   CONTACT US 

contact US

 

 

 

 

 

 

 

Send an inquiry

Read 2770 times
Sales Manager

Jason Xu
Email: jason@olideautodoor.com   Skype:Chinentech
Tel: +86 571 87641908   Whatsapp: 86 13735598300

You are here: Home Popular Products automatic sliding gate Automatic Factory Gate Opener

Payment Method

  western union1
  telegraphic transfer1 
  paypal1

follow us

facebook1 linkedin1
pinterest1 youtube1
twitter1 google1

 


   

 

Contact us

Address: East Industrial Area, Shaoxin, Zhejiang Province, China

TEL: +86 571 87641908
Email: jason@olideautodoor.com
skype: Chinentech
Whatsapp:86 13735598300

Web Analytics