You are here: Home Popular Products automatic swing gate Swing Gate Opening Mechanism

Swing Gate Opening Mechanism

Swing Gate Opening Mechanism are designed in two ways either single leaf or twin leaf, and they are both operating in the same way and direction. You can choose if you will have it gate mounted or underground gate operators. The gate mounted operators is less expensive, and the installation is much easier compare to the other kind. The underground gate mechanisms are operated through the motor and it must have enclosed housing. This kind of gate mechanism is not suitable to flooded area because the operation will be affected. Trouble will be experienced in either opening or closing of the gate.

Electric Swing Gate Opening Mechanism are types of gate system that are utilized to ensure safety of homes and businesses. Whether the area is small or huge, these are reliable security fences that you can trust. Both automatic and electric security gates are easier to install, and the work is mainly ground work. These mechanisms will automatically open and close the gate without getting out of your car. You will just press the button, and the security gate will open and close. The space that you have in the gate area will be determined so that you will choose if the swing will be inward or outward direction. One sided swing security gates are built only with a particular section. The double gate has two sections that will swing in inward or outward paths.

 Swing Gate Opening Mechanism

 Swing Gate Opening Mechanism whole set

 

 TECHNICAL SPECIFICATION of Swing Gate Opening Mechanism
Model SD1108
Motor power supply 24V DC
Rated power 40W
Rod speed 1.6cm/speed
Max.Leaf width and weight 3m&350kg
Max.Opening angle 110°
Operating ambient Temp. -20°~+55°
Gross weight 18kg

 

 FEATURE AND ADVANTAGE of Swing Gate Opening Mechanism

 1. Strong and beautiful appearance make it well equipped with the iron gate, wood gate.
 2. Soft start and stop, avoid damaging to gate, lower noise and longer service life.
 3. Emergency release key in case of power failure.
 4. Adjustable opening/closing interval between master and slave gate.
 5. Stop/Reverse in case of obstruction during gate opening/closing.
 6.Opening towards outside or inside is available when firstly install,only the direction is fixed. it can not be changed.

Swing Gate Opening Mechanism 1

Dual stainless Steel Housing  

 Double side board built in control box
Swing Gate Opening Mechanism  2
Built-in Soft Start and Stop Emergency Release Key

6. The rolling code remote control with no repeating code and anti-theif,ensure a safe house.

7. Control panel is adjustable to control 1 leaf or 2 leaves.
8. Control panel have the terminals for photocell,caution light,IC card reader(access keypad), 24 V back up battery,push button etc.

Swing Gate Opening Mechanism control board and remote control

1 leaf or 2 leaves opening or closing
can be adjusted by Control Box

Frequency: 433.92 MHz
 PACKAGING DETAILS of Swing Gate Opening Mechanism

 Swing Gate Opening Mechanism package

              Package size:1.0(L)*0.26(W)*0.13(H)(m)        Gross weight:18kg

 

 OPTIONAL ACCESSORIES
Swing Gate Opening Mechanism accessories
    Photo cell-$ 8/pair      Caution light-$6/set Access keypad-$25/set Electric latch-$35/set

                                    

A. Photo cell

1. It can detect the tiny obstruction during gate closing or opening and make the gate open automatically. Avoiding people and gate opener from hurting.

2.The valid detecting range of the photo cell is 10 meters.

B. Caution light

When the person force entering the house,the cuation will light and sound.

C. Access keypad

Connectiing with the access keypad, you can set the code or using the card to control the gate access.

D.Electric latch

24V DC latch for additional safety of the gate.Release key to unlock the latch when power failure.

 

Swing Gate Opening Mechanism wire connection diagram

1. ”LIGHT” for a flash lamp,24V DC.

2. “MOTOR1”,”MOTOR2” for 2 motors 24V DC.

3. “LIMIT1”,”LIMIT2” for the magnetic limit switch on motor1,motor2. (It is useful only for the motors with magnetic limit switch.)

4. “PHOTOCELL” for infrared protect device.

5.”BUTTON” for all switch.”PUSH1” control double-leaf gate,step-by-step “PUSH2” control single leaf gate which must be the priority of opening one       step-by-step.

6.”E_LOCK” for electronic lock. It can be convected with electronic lock which power is 24VDC.

 INSTALLATION PICTURE FROM CUSTOMERS PROJECT

 Swing Gate Opening Mechanism application

Swing Gate Opening Mechanism features:

Open and close the gate by remote controls.
Auto closing when the gate is open. Time duration can be programmed from 0 to 99 s
Auto stop when the running gate meet with resistance;
The force of motor can be programmed;
It is selectable to control 1 leaf or 2 leaves;
You may add security features such as deadbolt locks and you can choose to lock it manually or automatically. There are several ways in which you can install the security gate, you need to buy the kits if you have an existing gate. But, if you have no existing gate, you will have an alternative on what kind would you prefer. The size, materials and type of security measures varies so you must choose the proper swing gate for you. Electric controlled gate will have mechanical attachments to the existing gate. This can be powered through solar, batteries or through electricity. You must an option in case there is an electric blackout. You can connect it to a standby battery. Solar power is gaining popularity because once you have the kit it will have minimum maintenance. A transmitter and a receiver are essential in automated gates because it will be one that will control the gate at a distance.

Swing gate opening mechanisms differ to the range of operation. It can be wireless and will work within the 50 ft and up to 100 feet. Weather conditions will affect the functionality of the gate. Some prefer to have the hard wire the control when the house is quite distant from the gate.

 PACKAGING AND SHIPPING

swing gate opener shipping

   WHY CHOOSE US?

   why choose us 1 

   CONTACT US 

contact US

Send an inquiry

Read 4897 times
Sales Manager

Jason Xu
Email: jason@olideautodoor.com   Skype:Chinentech
Tel: +86 571 87641908   Whatsapp: 86 13735598300

You are here: Home Popular Products automatic swing gate Swing Gate Opening Mechanism

Payment Method

  western union1
  telegraphic transfer1 
  paypal1

follow us

facebook1 linkedin1
pinterest1 youtube1
twitter1 google1

 


   

 

Contact us

Address: East Industrial Area, Shaoxin, Zhejiang Province, China

TEL: +86 571 87641908
Email: jason@olideautodoor.com
skype: Chinentech
Whatsapp:86 13735598300

Web Analytics