Olide autodoor

The Automatic Bi-Parting Sliding doors is very suitable for interior or exterior use for public buildings and even for private applications. It was designed with different material stainless steel, aluminum, which has finishes range. All of the aluminum parts that are visible were powder coated in different RAL color. The panes of this type of automatic door were double glazed glass for safety with 77mm fascia height.

In installing automatic doors like automatic bi part sliding doors, it is better if you going to connect it to the fire alarms in order to comply on fire regulation as well as to make sure that there will be less emergencies that may occur in the building or in any areas. The door will stay open if you have activated the fire alarm, until it was reset.

DC 24V Brushless Motor Worm gear reduce make it low noise; Advanced PWM Pulse width control mode providing reliable strong driving force and protect the stable operation of the product;Full enclosed structure ensure long service life.
	Intelligent 32 bit microprocessor,             Pass more safty. 32 bit microprocessor in electric board make the door sliding reversely when touch obstacles; Opening&closing parameters can be intelligently ajusted by control panel without extra programmer; Various connectors can connect with different optional access control accessory.
One more reducer wheel,more stable and low noise One more reduce wheel make the teeth belt more stable and low operation noise, The roller is made of polyurethane,it is durable and light.
	Complete perfect access control system Only entering the passcode or swiping card on the optional  access keypad,people can be entered. Autodoor can reach the functions of automatic/exit only/partial open/locked and open by the optional five key selector. Various optional accessories such as foot sensor,touch sensor,push button etc.can be equipped.
Functions of Safty beam and microwave sensor          are perfectly combined. The optional active rader&infrared safety sensor is combined the   function of safety beam and microwave sensor If install it, no need safety beam and microwave sensor.More intelligent and convenient ,only  need one wire connection, no need more for safety beam and microwave sensor.
Special LM-shaped girder,”Record”similar quality Heavier and strong beam and cover
STM 20-200 beam and cover  Weight of 4.2 meters cover is about 16kg	Normal beam and cover from other suppliers Weight of 4.2 meters cover is only 10 kg

Our standard size for the cover and transmission rail is 2*210cm,it is just like the picture one double leaf door shows.If door size is beyond it ,Or if it is single leaf door,please contact us to choose the correct size for you.

                                      Double leaf door                                                                                 Single leaf

Among all the kinds of automatic sliding door, automatic bi-parting sliding doors are one of the most efficient, convenient, and reliable. It offers several features that will surely provide a safe and easy access on your building. It is reliable and smooth, it has full threshold for safety, emergency opening in case of fire or any power failure.

With the benefits that this automatic bi-parting sliding doors, it will definitely provide easy and safe access of your area. Moreover, it creates an effortless convenience as well as the feeling of feeling of being secure. It has range for possible configuration as well as functions that allow accessing optimized traffic flows.

 Dynamical system of Automatic Bi-Parting Sliding Doors:

1. A motor provides the main force for opening and closing, and controls the acceleration and deceleration of door leaf operation.
2. The tracks that the door leaf moves along constrain the spreader and wheel system to move in a particular direction.
3. The spreader and wheel system is used for hanging door leaves, and drives them run under the dynamic traction.
4. Synchronous belt (some factories use triangle belt) is used to transmit power produced by motor, and then draw the spreader and wheel system.
5. The guiding system is a device set under the door leaf for orientation and positioning, and it can prevent the door leaves from swinging back and forth when in operation.

Nowadays, there are many designs and styles you can find as far as doors are concerned. If you are planning to renovate or perhaps install a new aesthetic door, one of the best types of door you may want to consider is the commercial automatic swing door. It is considered as one of the best forms because it has the combination of the traditional and innovative doors. Traditional because it is swinging just like the traditional doors, while innovative because of its automatic feature. You can commonly see them in most business establishments because of its popular use.

One set Commercial Automatic Swing Doors includes: Opener,  2 arms, 2 remotes, 2 push buttons. Articulated arm and sliding arm both available, can be mounted on the hinge side and opposite hinge side.

                                          Articulated Arm                                                                   Sliding Arm               

                                                                              Remote control Introduction            

  1. surface mounting
  2. Push-Go: Automatic activation by pushing or pulling door panel
  3..Quiet and aesthetically pleasing
  4. Electric strike integration
  5. Efficient and cost-effective

       Note: backup battery is optional accessory, not included in one complete set.

 1. Access keypad (card reader)    
 Designed for the control of office building,office,residential house, security system.Card reading and password inputting.Great power of card reading  with the distance no less than 10cm.

2. Wire&wireless push button

3. Hand sensor switch 
With the non-contact induction design, door can be open in an easy and clean way.Transmit distance is adjustable from 1 to 15 cm.

4. Passive Infrared sensor  (Body sensor)
Just induce the movement of human body only.When someone moves, the sensor will react and door operator will be triggered to operate.Maximum detection speed: 5cm/s.          

5. Foot sensor     
When feet is detected, beam will be cut off and thereby trigger the signal for door opening.

5. Electric lock     
Make your doors more security. Easy installation. Provide with bracket for installation.Holding force: 280Kg(600Lbs).

6. Hand programmer

  Easily adjustable opening&closing speed, opening angle,hold open time by hand programmer.

      Know more about the operator, function, programming, please visit our videos on Youtube:

	A safety feature is built-in to each door opener. When an obstacle is detected during the Operation of the opener,it will stop the opening or closing cycle immediately,until the opener is activated again and the obstacle is  cleared out ofthe way.
		Manually open when  power off

As a leading automatic door manufacture in China, Chinentech produces and supplies high-quality and cheap prices automatic ldoors for customers.
Chinentech makes every effort to manufacture automatic doors with the best quality and most favorable prices, and offer the best services. All automatic doors are checked and updated regularly.
If you want to inquire about the Commercial Automatic Swing Doors prices, please contact us.

How Do Commercial Automatic Swing Door Operate?

A commercial automatic swing door mainly functions because of the swing door operator. It is sometimes termed as the swing door opener, which is the major device operating a commercial automatic swing door intended for pedestrian use. It helps open or opens the door automatically, waits after a person enter or leave, then automatically closes it.

 Applications:

• Full energy – this application allows the door to open and close at ample speed. This is often used for the entrances of those medium-sized businesses that are provided with average to heavy pedestrian traffic levels. Those larger retail businesses rather prefer the operators of sliding doors. In this application full safety measures of automatic door will apply.
• Low energy – this application enables the door to open and close at a reduced speed. It reduces the speed for the appropriate control of kinetic energy produced by the motion door in order to level and consider the safety of handicap users. This application is often used where the closer of the simple door is sufficiently enough for those abled users. However, it is needed to add admission to the handicap ones. This is suitable for small business, bathrooms and apartments with light pedestrian traffic.
• Power assist – this is the application in which the user is allowed to manually open the door at a minimum force. This makes the door look lighter than opening an average door closer. The commercial automatic swing door then closes just like the typical closer of spring door.
• Push and go – the operator will stimulate when the door is opened manually.

These different automatic swing door operators can work with different technologies. The primary strategy of knowing the difference among them is how the energy of the motor is applied. Say for instance, electro-mechanical operators purely use mechanical means and parts in order to open the door. There are also permanently engaged or disengaging versions for this. Alternatively, the electro-hydraulic operator drives the hydraulic pump in order for the oil pressure to be used for operating the door.
There are also different sensors used within these commercial automatic swing door applications. Most of the time they are used on the full energy operator while the modern sensors utilize infrared for the detection of approaches going inside and any possible obstructions within the swing space.
Using a commercial automatic swing door in your business or at home can be a very beneficial thing. However, you should properly know how to use and install them to avoid unwanted instances once the door is already operating.

Description of automatic sliding door mechanism

The use of technology has become a major advantage for many people, be it from various appliances to automatic generating house ware and now, even the electric sliding door. Before, people never experience the convenience brought by electric sliding door and are only used to the traditional doors. Automatic sliding door mechanism becomes really popular these days especially in most commercial establishments.

There are lots of different electric sliding door mechanisms that are widely available in the market nowadays. Unlike before, now, it is very common to experience and see them operating in commercial, retail, public buildings, offices and medical leisure in all kinds. From a point of view of any users, electric sliding door mechanism is generally fast, convenient and easy to use. However, from the point of view of some organizations they offer effective, efficient and safe way to monitor or control getting access inside their building while in other cases may add up some aesthetic look to the building.

DC 24V Brushless Motor Worm gear reduce make it low noise; Advanced PWM Pulse width control mode providing reliable strong driving force and protect the stable operation of the product; Full enclosed structure ensure long service life.
	Sparete transformer,elelctric voltage and       electric current transform easily. 32 bit microprocessor in electric board make the door sliding reversely when touch obstacles; Opening&closing parameters can be intelligently ajusted by control panel without extra programmer; Separate transformer with control panel,electric voltage and electric current can transform easily.
One more reducer wheel,more stable and low noise One more reduce wheel make the teeth belt more stable and low operation noise, The roller is made of polyurethane,it is durable and light. The large space between the wheels make little friction between the belt and wheel.
	Complete perfect access control system Only entering the passcode or swiping card on the optional  access keypad,people can be entered. Autodoor can reach the functions of automatic/exit only/partial open/locked and open by the optional five key selector. Various optional accessories such as foot sensor,touch sensor,push button etc.can be equipped.
Functions of Safty beam and microwave sensor          are perfectly combined. The optional active rader&infrared safety sensor is combined the function of safety beam and microwave sensor If install it, no need safety beam and microwave sensor.More intelligent and convenient ,only  need one wire connection, no need more for safety beam and microwave sensor.
Special slot connect with beam and cover Cover opening and closing more convinient                                  SD 280 cover and beam                                                         SD 280 cover and beam

Our standard size for the cover and transmission rail is 2*210cm,it is just like the picture one double leaf door shows.If door size is beyond it ,Or if it is single leaf door,please contact us to choose the correct size for you.

                                      Double leaf door                                                                                 Single leaf

Working principle of automatic sliding door mechanism

However, although the use of automatic sliding door mechanism can be very satisfactorily, there are still many people who do not know how such system works. If you are one of these people who keep on wondering about the wonderful operation of the automatic or electric sliding door mechanism, here are some things you might want to know:

• The optical sensor – these electric sliding doors utilize motion or optical detection sensors in order to generate their motorized closing and opening functions. These sensors will be installed on the electric door or perhaps integrated into its framing from the side or above. The sensors utilize either microwave or infrared technology that enables the observation of movement and are typically used in industrial and commercial setting that allows easy access for everyone both able and handicap individuals, for safety and efficiency. In which, every time a person get close to the door, it will automatically open and enable the person to enter conveniently. This form of mechanism is very beneficial most especially to those people with disabilities.
• Rollers and tracks – electric sliding door mechanism may be installed or hung in numerous ways relying on the style or the application of the door. Others can be hung from tracks above head (if it is frame-less all-glass door) and don't get contact with the ground plane but glide over it during the operation. They can also be installed on other side supported with tracks and rollers, which creates the connection from the floor plane (for this instance the single sliding doors). Furthermore, they may be mounted within a certain metal frame provided with connections, rollers and tracks for both the floor planes and overhead as well.
• Motor mechanism – the motion or optical sensor is connected to an electric primary drive train which controls the clutch mechanism that is attached on the cog wheel or auxiliary drive and the panel or door panels. The door together with the auxiliary drive becomes connected because of the internal cables or belts, which are often made of rubber. They are the ones responsible for closing and opening operation of the door.

In addtion,With more and more application of automatic doors, many users offer new demand for electric lock.

The locking function of automatic doors is realized in several ways: electric lock, magnetic lock, self lock of eletric motor.

Electric lock

The earliest automatic doors apply the electric locks. There are two kinds of electic locks in the market: dedicated and nondedicated. Dedicated electric locks were first imported from Taiwan and is especially designed for all kinds of automatic door. The working principle is that after recieving the signal from an inductor or access controller, the electric lock opens the lock first and then open the door. Such working principle can avoid the case that the door is opened while the lock is not. And the control unit of lock can delay the trasmission of door-open signal, which is why it is called dedicated lock. Dedicated electric locks have the advantage of making it more difficult to open the door destructively or by force. However, such locks have complex connection modes, are expensive and provided only by manufacturers specialized in automatic doors. Domestic manufacturers can try independent research and development, and the lock body can be equipped with general electric lock. Common electric lock can not delay the tramsmission of door-open signal, and lock-open signals are transmitted by at the same time. Thus the door might be opened faster than the lock, and the spreader bumps into the unopened lock that causes the malfunction of automatic doors. The news reports that people are locked in self-service bank are of the same situation.

Magnetic lock

Magnetic locks, like electric doors, are also designed for dedicated and nondedicated use. But the former works by sucking doors with magnetic force while the latter works by stucking doors with locks. Magnetic locks provide the advantage that the doors are clozed without any space, so that accidents made by children can be avoided. The shortcoming of magnetic locks is that the doors will be opened when the bearing capacity is surpassed.