Industrial door opener
Industrial door opener details
1. The operator is composed of motor, gearbox, manual releasemechanism and control system.
2.Pull hand chain Directly when it is powered off,it will keep working.
3.Setup Quick clutch
4.External infrared protection switch and a pressure-sensitive switch on Demand
5.The operator is oil submerging ,good lubrication, low noise, long use life.
Industrial door opener control box
1.It can be equipped with remote control receiver module.
2.Equipped With a door in the door Protection Interface.
3.External infrared protection.
4.You can set the time according to the actual running time protection.
5.External pressure wave switch
Industrial door opener control box
| Input voltage |
AC220V | Noise | ≤55dB |
| Rated power | 300W | Mode of Manual chain | Universal chain type |
| Startup torque |
35N.m | Swift release upon power failure | pull-rope release |
| No-load running |
15min | Max limited journey | 20 rounds rotation of the output shaft |
| Maximum door weight |
20 ㎡（thickness of4cm） | Type of limited switch | The absolute value encoder electronic limite |
| Supportive power control |
Split type | Diameters of hole for out put shaft | φ25.4mm |
| Thermal protective temperrature |
120 ℃ | Ambient temperature | (-20℃~45℃) |
| No-load rotating speed |
24r/min | protective level | IP54 |
| Lubrication | oil submerging | Total weight | 14kg |
Industrial door opener application
Industrial door opener installation
WHY CHOOSE US?
CONTACT US
